Miele WT 945 S WPS Washer/Dryer User Manual


 
The wash programme stops and a fault indicator light comes
on.
Problem Possible cause Remedy
The Water inlet/drain
indicator lamp is
flashing and the load in
the machine has not
been washed.
The water inlet system
is blocked.
Turn the programme
selectors to
Finish
.
Open the stopcock.
Select and start the
programme again.
The Water inlet/drain
indicator lamp is
flashing.
There is a blockage in
the water outlet.
Clean the fluff filter and
the drain pump.
Has the drain hose been
fitted too high? Maximum
delivery head 1.00 m.
The Waterproof system
has reacted.
Call the Miele Service
department.
The Final spin indicator
lamp is flashing in the
programme sequence
display.
The final spin has not
taken place. The
machine detected an
imbalance.
Loosen the laundry.
Turn the WASHING
programme selector to
Spin
.
Make sure you select an
appropriate spin speed
for the type of load.
Problem solving guide
45