Filter
Top Products
Programmable functions Programme end
Deleting the programmable function:
Follow the same instructions as given
under “switching on the programmable
functions”, step 1 to step 4 inclusive.
The “Rinses/Rinse hold” lamp goes out.
Press “On/Off”.
The programmable function is deleted.
If after Step 2 you accidentally turn
the selector switch to a setting other
than one of the three in the chart
above:
– Rinses/Rinse hold indicator
does not light up - no function
is activated
– Rinses/Rinse hold indicator
lights up - proceed as for “Delet-
ing the programmable function”.
Exception: the Rinses/Rinse hold in-
dicator lights up if the switch was set
to “Cottons 95°C”.
After washing:
Turn the programme selector switch
to “Finish/Start”.
Open the door.
Switch the machine off.
Only remove laundry from the ma-
chine once the drum has stopped
turning, otherwise you may seri-
ously injure yourself.
Check the folds in the door seal for
any small articles such as buttons or
other foreign bodies which might be
lodged there.
Turn off the stopcock.
Close the drum door.
Make sure the drum is empty, other-
wise, when the machine is next
used items may become damaged
(e.g. shrink) or cause other laundry
to discolour.
21