Filter
Top Products
Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
This washing machine has
undergone a complete functional test
at the factory and there will be some
residual water in the drum from this
process.
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
amount of detergent required. To allow
the load size indicator to function
correctly, you must first run a wash
programme without any laundry
and
without detergent
.
^ Press the K button in.
If the washing machine is being
switched on for the first time, the
welcome screen will appear briefly.
The welcome screen will appear in the
display every time the machine is
switched on until a programme lasting
longer than 1 hour has been
completed.
The display for setting the language will
then appear.
Setting the language
You will be asked to select the
language you require for the display. It
is possible to select another language
at any time via Further programmes/
Settings 4 in the Settings sub-menu.
Sprache
deutsch
;
english ,
^
Press the X and Y buttons to scroll
through the options until the
language that you want is
highlighted. Press the OK button to
confirm your selection.
Setting the time (of day) (if
necessary)
The display for setting the time will then
appear.
Time
12:00
^
Press the X button to decrease or the
Y button to increase the hour.
^
Confirm the hour selected with the
OK button. Then do the same to set
the minutes.
Before using for the first time
13