Code
A code can be used to lock the
electronics on the washing machine
to prevent it being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Code ...
^
Press the Start/Stop button.
To activate the code
Activate
^ Press the Start/Stop button.
The display will now request that a
code is entered.
To enter the code
The code is 125 and cannot be altered.
O __ __
^
Turn the programme selector until the
first number appears in the display.
^
Confirm your selection of the number
by pressing the Start/Stop button.
^
Repeat the process until all three
numbers have been entered.
125
^
Press the Start/Stop button.
The following will appear in the display:
Code activated
Once the machine is switched off, it
can only be used again if the code is
entered.
To use the washing machine when
the code is activated
When the machine is switched on
again, the display will request the code.
^ Enter code 125 as described above
and confirm the entry.
The washing machine is now unlocked
and ready for use.
To deactivate the code
Make sure the washing machine is
switched off and the door is properly
closed. Press the Start/Stop button and
keep it pressed in whilst you press the
jk button in.
As soon as...
O __ __
. . . appears in the display, release
the Start/Stop button.
^
Now enter the code and press the
Start/Stop button.
^
Select Code and confirm Deactivate.
Programmable functions
58