Cancelling a programme
You can cancel a programme at any
time after it has started.
^
Turn the programme selector to ,
Finish.
The programme has been cancelled
when the Anti-crease/Finish indicator
light comes on (this can take up to 30
seconds).
If you want to select a different
programme:
^
Switch the machine off and then back
on again with the I-On/0-Off button.
^ Check that there is still detergent in
the detergent drawer. Add detergent,
if necessary.
^ Select and start a new programme.
If you want to remove the laundry:
^ Turn the programme selector to
Drain/Spin. Make sure the spin speed
is appropriate for the laundry.
^
Press the Start button.
The suds will be pumped away.
^
Press the Door button.
Interrupting a programme
^
Switch the machine off with the
I-On/0-Off button.
To continue with the same programme:
^
Switch the machine on with the
I-On/0-Off button.
Changing a programme
After the start of a programme it is no
longer possible to select a different
programme.
Temperature
It is possible to select a different
temperature up to 6 minutes after the
programme has started.
Spin speed
It is possible to change the spin speed
at any time.
Additional options
It is possible to select or deselect the
Water plus additional option up to 6
minutes after the programme has
started.
Skipping a programme stage
^ Turn the programme selector to ,
Finish.
As soon as the programme sequence
indicator light for the programme stage
you want the programme to continue at
starts flashing:
^
Turn the programme selector back to
the appropriate programme again
within 4 seconds
.
Changing the programme sequence
27