Miele W 1513 Washer/Dryer User Manual


 
Fault messages in the display
Problem Possible cause Remedy A
; lights up in the
display and
Drain fault
flashes.
The water outlet is
blocked or
restricted.
The drain hose has
been fixed too high.
Clean the drain filter and
the drain pump.
The maximum delivery
head is 1 m.
; lights up in the
display and
Water inlet
fault
flashes.
The water inlet is
blocked or
restricted.
Check whether
the stopcock is opened
properly.
the inlet hose is kinked.
the water pressure is too
low.
; lights up in the
display and
Waterproof
fault
flashes.
The water protection
system has reacted.
Call the Service Department.
; lights up in the
display and
Technical
fault
flashes.
There is a fault. Start the programme again.
If the fault message appears
again, contact the Service
Department.
Anti-crease
Chk detergent
flashes in the display.
Excessive foam has
built up during
washing.
Use less detergent next time
and follow the manufacturer's
instructions on dosage given
on the packaging.
A To switch off the fault message: Switch the machine off with I-On/0-Off button.
Problem solving guide
34