Filter
Top Products
,
Repairs to electrical and gas appliances must only be carried out by a
qualified and trained person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous.
The following section will help you avoid placing a service call by identifying
issues you may encounter while operating the machine:
General problems
A drying program cannot be started.
Possible fault Solution
The "Start/Stop" button was not
pressed.
Make sure the dryer is on. Press the "Start/
Stop" button to begin the drying program.
The circuit breaker has tripped or
the dryer is unplugged.
Make sure the dryer is plugged in or reset
the circuit breaker.
The door is not closed. Close the door properly.
The dryer turns off automatically.
To ensure proper performance, the dryer is equipped with a safety feature to
prevent it from operating when there is an insufficient electrical supply. The
machine will automatically shut itself down to avoid risks due to decreased
performance and airflow levels. Once a sufficient electrical supply is restored to
the machine it will automatically reactivate and can be used as normal.
Lint has built-up on laundry.
Lint is the result of friction caused
by items being worn and washed.
Machine drying causes minimal
strain of the laundry and has no
significant effect on the durability.
Dryers have no detrimental effects
on the lifetime of fabrics.
The lint is collected in the lint filters and can
be easily cleaned (see "Dryer Care").
The items dried have static cling.
Add fabric softener to laundry when washing or use dryer sheets.
Frequently asked questions
19