Miele T 9820 Clothes Dryer User Manual


 
Exhaust connection with a
flexible exhaust hose or rigid
pipe
Using the connector supplied, an
exhaust hose (4" [100 mm]
diameter) can be installed.
Necessary materials:
a wall or window duct
(available from Miele)
an exhaust hose made of approved
non-flammable material
^
Install the required connector*, 1,
with the exhaust hose or pipe, 2,to
the dryer.
* The white connector with clips is
used for connection to a hose; the
gray connector without clips is used
for connection to a pipe.
,
WARNING
Do not remove the restriction insert
in the vent opening. It may result in
poor drying results, damage to the
laundry and higher CO
2
emissions.
The exhaust duct must not be
connected or secured with screws
or other fastening devices which
extend into the interior of the duct.
Ducting
47