Filter
Top Products
Altering the volume of the
buzzer
The buzzer has two volumes.
Follow the steps (A,B,C ...) to pro
-
gramme and store in memory.
Before you begin, ensure that:
–
The tumble dryer is switched off.
–
The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the Start/Stop button lights up
constantly ...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
three times.
– The Low temperature indicator light
will flash four times briefly.
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Normal buzzer
(factory default setting)
I Loud buzzer
(the Automatic plus indicator light will
also flash)
E Pressing the Start/Stop button
switches between the options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps A to D.
^ Switch the dryer off after step D.
Programmable functions
53