The system lock prevents your
machine being used without your
knowledge.
It can be activated if wished.
The dryer's electronics are locked. The
dryer can still be switched on but a
programme cannot be started. The
Locked
indicator light will flash if an
attempt is made to start a programme.
The door is not locked and can be
opened at any time.
To activate the lock
Before you begin, first ensure that:
– the door is closed.
– The programme selector is at
Finish
.
A Switch the dryer on with the
I-On/0-Off
button.
B Press the
Short
button and keep it
pressed in whilst carrying out steps
C to E.
C Slowly turn the programme selector
clockwise
stage by stage to the
Cottons Hand iron
position.
D Slowly turn the programme selector
anti-clockwise
stage by stage to
Finish
.
E Slowly turn the programme selector
anti-clockwise
stage by stage to
Denim
.
The
Locked
indicator light will flash.
F Then release the
Short
button.
The system lock is activated.
G Switch the machine off with the
I-On/0-Off
button.
To deactivate the lock
Before you begin, first ensure that:
–
the door is closed.
–
The programme selector is at
Finish
.
A Switch the dryer on with the
I-On/0-Off
button.
B Press the
Short
button and keep it
pressed in whilst carrying out steps
C to E.
C Slowly turn the programme selector
clockwise
stage by stage to the
Cottons Hand iron
position.
D Slowly turn the programme selector
anti-clockwise
stage by stage to
Finish
.
E Slowly turn the programme selector
anti-clockwise
stage by stage to
Denim
.
The
Locked
indicator light will go out.
F Then release the
Short
button.
The system lock is now deactivated.
Electronic system lock
20