Miele T 4162 Clothes Dryer User Manual


 
Altering the residual moisture
level in the Cottons
programmes
The machine is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier, it is possible to reduce the
default residual moisture level in the
Cottons programmes.
Please note that programme
durations will be longer if this option
is activated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
The tumble dryer is switched off.
The door is closed.
The programme selector is at
Finish
.
A Press the
Start
button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the dryer on with the
I-On/0-Off
button.
C Wait until the
Start
indicator lamp
comes on . . .
D . . . and then release the
Start
button.
E Turn the programme selector to the
Cottons Normal
position.
F Pressing the
Start
button switches
between activating and deactivating
the drier setting.
If the
Drying
indicator lamp is
flashing: the drier setting is
activated
If the
Drying
indicator lamp is not
flashing, the drier setting is not
activated and the residual moisture
level is on the standard default
setting.
G Switch the machine off with the
I-On/0-Off
button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check:
^
Make sure the dryer is switched off,
the door is closed and the
programme selector is at Finish and
then carry out steps A to E.
The
Drying
indicator lamp will show you
if the drier setting has been selected.
^
Switch off the dryer.
The check is complete.
Programmable functions
40