Miele T 1303 Clothes Dryer User Manual


 
Installation, repair and
maintenance work should be
performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and could
void the warranty.
Before installation, disconnect the
tumble dryer from the electrical
supply by shutting off the power main,
unplugging the power cord or tripping
the circuit breaker. Do not restore
power until the installation is complete.
GROUNDING INSTRUCTIONS
This appliance must be grounded.
In the event of malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for electric
current. This appliance is equipped
with a cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
WARNING – Improper connection
of the equipment grounding
conductor can result in a risk of electric
shock. Check with a qualified
electrician or service representative or
personnel if you are in doubt as to
whether the appliance is properly
grounded.
Do not modify the plug provided
with the appliance! If it will not fit
the outlet, have a proper outlet installed
by a qualified electrician.
This dryer must be vented
outdoors to reduce the risk of fire.
Be sure to observe local building
codes.
Use flexible or rigid metal pipe for
venting. Non-metallic flexible hose
should not be used, it is a potential fire
hazard.
The dryer exhaust must not be
connected to a chimney, ducting
which ventilates rooms with fireplaces,
a combustion appliance vent flue, a
wall, ceiling or concealed space of a
building.
If there is any doubt concerning
installation, contact Miele’s
Technical Service Department.
U 1-800-999-1360
techserv@mieleusa.com
V 1-800-565-6435
service@miele.ca
IMPORTANT SAFETY INSTRUCTIONS
22