Filter
Top Products
D Select a programme
^ Turn the programme selector to the
required programme.
Low temperature
^ For drying particularly sensitive
fabrics (care symbol r) e.g. acrylics
turn the programme selector to the
Low temperature
position.
Because the heater rating is reduced
for the
Low temperature
setting clothes
dry more slowly thus lengthening drying
times.
E Start the programme
^
Press the
Start
button.
The indicator lamp for the
Start
button
will then change from flashing to being
on constantly.
The drying cycle begins.
Depending on the programme
selected, the drying stage reached is
shown by the sequence indicator lamps
on the right hand side of the control
panel.
Before the end of a programme
The cooling down phase takes place
before the end of a programme so that
the garments are not too hot to handle
(the
Cool air
indicator lamp will come
on). The programme is not finished until
the cooling down phase is complete.
At the end of a programme
The
Anti-crease/Finish
indicator lamp
comes on.
The drum will continue to rotate at
intervals to prevent laundry creasing, if
you do not wish to remove it immediate
-
ly. The anti-crease phase lasts for an
hour. There is no anti-crease phase on
the
Woollens handcare
programme.
During the anti-crease phase . . .
. . . (depending on the programme
selected) the indicator lamp for the
drying stage reached will also light up.
. . . the buzzer will sound at intervals.
How to dry correctly
12