Filter
Top Products
Assembly:
1. Insert the 3 legs into the corresponding holes on
the bottom of the motor unit as per the below
diagram.
2. Connect the three tubes that form the support
arm by screwing them in to each other
3. Fit the water-proof plate onto the lower support-
ing tube and then attach the lower supporting
tube onto the motor body by screwing it in a
clockwise direction.
4. Insert the hanger into the upper supporting tube
and then pull the aluminum hangers down into
the level position.
5. Hang your clothes on the clothes racks, then
put on the cover over the unit and zip it closed.
Operation instructions:
1. Insert the plug into power socket; make sure the
voltage on the rating label corresponds to the
voltage of the mains socket. Ensure the mains
power is off when plugging the appliance in and
unplugging it.
2. Once you have plugged the appliance in switch
on the power at the wall socket.
23700_IM.indd 4 2012/11/01 11:30:58