Filter
Top Products
SPRAYING
- At any temperature by pressing on the spray
button a couple of times, the laundry can be
damped down.
- Ensure that there is enough water in the water
tank.
DRY IRONING
• Insert the main plug into the wall socket.
• Ensure that the dry/steam selector button (C) is
in position“0”.
• Select the setting on the temperature control
dial best suited for the fabric to be ironed.
• When the indication light has gone out, ironing
may commence.
STEAM-IRONING
• As indicated on the temperature control dial
and the temperature table, steam ironing is only
possible at higher ironing temperature:
• Ensure that there is enough water in the water
tank.
• Stand the iron on its rear side.
• Insert the plug into the wall socket.
• Set the temperature control dial to the steam
position.
• Wait a little while for the power indication light to
go out and to come on again.
• Set the dry/steam selector knob to the steam
position. The steam will emerge from the vents
in the soleplate when the iron is held in the
horizontal position.
CARE AND CLEANING
• Before cleaning the iron, ensure it is
disconnected from the power supply and has
completely cooled down.
• Deposits and other residues on the soleplate
can be removed with a rough cloth soaked in a
vinegar/water solution.
• The housing/body may be wiped with a damp
cloth and then polished with a dry one.
• Dot not use abrasives on the soleplate.
• Keep the soleplate smooth: avoid hard contact
with metal objects.
• NOTE: Ironing dirty fabric or fabric not rinsed
fully will result in the iron sticking and dirt
accumulating on the bottom of the soleplate, as
will a iron set at too high a temperature for the
relevant fabric.
PACKING THE IRON BEFORE TRAVELING
• Let the iron cool down completely.
• Empty the water tank.
• Press the unlock button and fold handle to the
side.
STORAGE
• Turn the temperature control dial to “MIN” and
set the steam selector dial to position “0”. (“0”
=No Steam).
• Disconnect the plug from the wall socket.
• Pour any remaining water out of the water tank.
Then cover the filler cap.
• Stand the iron upright and let it cool down
sufficiency.
• The power cord can be wound around the iron.
• Press the unlock button and fold the handle to
the side.
MW_CO23101 Voyager_IM.indd 5MW_CO23101 Voyager_IM.indd 5 3/6/2009 9:30:19 AM3/6/2009 9:30:19 AM