Filter
Top Products
Safety Instructions and Warnings
- Read these instructions carefully before putting the appliance into operation and keep them for future
consultation.
- Before connecting the appliance to the mains, check that the voltage indicated on the nameplate
coincides with the mains voltage.
- Do not use this appliance if it is damaged in any way.
- Unravel the power cable fully.
- Always unplug the iron when out of use, even for a short period.
- Do not leave the appliance within the reach of children or disabled individuals.
- Unplug the iron before filling or emptying the water deposit.
- Never submerge the iron in water or put it under running water.
- In order to avoid overloading, do not plug in another high voltage appliance on the same supply line.
- Any inappropriate use or the nonobservance of the instructions for use, renders the guarantee and the
manufacturer’s liability null and void.
- The appliance must be used and placed on a flat, stable surface
- When placing the appliance on its support, make sure the surface on which the support is fitted is stable.
- Do not use the appliance if it has been dropped, if there are visible signs of damage or if it leaks.
Instructions for Use
Suggestions before using the appliance for the first time:
Some parts of the iron have been lightly greased and thus the iron may produce a little smoke when
plugged in for the first time. This will stop after a short period of time.
- Before putting into use for the first time, remove the plastic cover from the base and clean the base with a
soft cloth.
- Keep the base smooth: do not touch it off metal objects (buttons, zips,…)
- Pure wool fabrics (100%) can be ironed with the iron set to steam. Preferably chose a high steam position
and use a dry ironing cloth.
Temperature setting:
- Always check each garment’s ironing instructions.
- If a garment does not have any ironing
instructions, see the fabric classification below.
- If the garment has several different types of fibre, select the lowest temperature setting.
- Classify the number of garments by ironing temperature. The iron heats up faster than it cools down so
we recommend you start your ironing with those garments that require lower temperatures and then
gradually increase the setting.
- Connect the appliance to the mains. The pilot light will come on. Turn the temperature gauge to the
desired temperature.
* Setting for nylon and acetate
** Setting for wool or silk
*** Setting for cotton or linen
The pilot turns off when the desired temperature is reached.
How to fill the water deposit:
- Unplug the appliance.
- Fill the water deposit through the filling hole (Fig. 1).
- If your tap water is hard, use distilled water only.
-Do not use chemically decalcified water.
-The harder the water the more frequently the iron should be cleaned.
- Throw out any excess water after use, once the iron has been unplugged.