Filter
Top Products
11
6. Press POWER/CANCEL to turn
on washer
7. Select CYCLE
The display will show the default settings for the selected
cycle. If desired, press the button beneath each setting to
adjust the Temp Level, Spin Speed, and Soil Level. Tightly
packing, unbalanced loads, or excessive suds may also
cause the washer to increase the cycle time.
NOTE: Not all settings are available on all cycles. See “Cycle
Guide” for available settings.
Turn cycle knob to select your wash cycle. See “Cycle Guide”
for details on cycle features. Not all options and settings are
available on all cycles.
8. Adjust cycle settings, if desired
9. Select additional options, if desired
(on some models)
10. Press and hold START/PAUSE
to begin wash cycle
To add additional options to the cycle, press the button for
the desired option until light glows to add them to the
selected cycle.
NOTE: Not all options are available with all cycles. See
“Cycle Guide” for available options.
Delay Start
If you do not want to begin a cycle immediately, you may
choose the DELAY START option. This will delay the start
of the wash cycle by up to 10 hours.
To set DELAY START:
1. Press DELAY START until the desired delay time (in hours)
is illuminated.
2. Press START/PAUSE. The countdown to the wash cycle
will show in the display window.
Press and hold the START/PAUSE button to start the wash
cycle. To pause a cycle in progress, press the START/PAUSE
button once, then press and hold again to continue the cycle.
To cancel a cycle, press the POWER/CANCEL button.
Door Locked
Once you press and hold START/PAUSE, you will hear
the door lock, unlock, and lock again. When the door locked
light illuminates, the door is locked. The door is locked
and unlocked automatically, depending on the stage of
the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2 missed garments,
you may do so while the “Add Clothes” light is lit.
Press START/PAUSE once; the door will unlock once the
washer movement has stopped. This may take several
minutes. Then close door and press START/PAUSE again
to continue the cycle.
To add garments after the “Add Clothes” period is over, the
wash cycle needs to be canceled, the items added, and a new
wash cycle started.
Slowly close the dispenser drawer. Make sure the drawer is
closed completely, then press and hold POWER/CANCEL to
turn on the washer. To cancel a cycle press POWER/CANCEL,
then the washer powers down, the door unlocks, and clothes
can be removed.
Model YMHWE301** shown
Model YMHWE301** shown
Model YMHWE301** shown