Filter
Top Products
3
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed:
Parts package is located in dryer drum. Check that all parts
are included.
Parts needed: (Not supplied with dryer)
Check local codes. Check existing electrical supply and venting.
See “Electrical Requirements” and “Venting Requirements”
before purchasing parts.
Mobile home installations require metal exhuast system hardware
available for purchase from the dealer from whom you purchased
your dryer. For further information, please refer to the “Assistance
or Service” section in your “Use and Care Guide.”
Optional Equipment: (Not supplied with dryer)
Refer to your “Use and Care Guide” for information about
accessories available for your dryer.
Parts supplied (all models):
Parts supplied (steam models):
Flat-blade screwdriver #2 Phillips screwdriver
Wire stripper (direct wire
installations)
Tin snips (new vent
installations)
1/4" nut driver
(recommended)
Vent clamps
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
Caulking gun and
compound (for installing
new exhaust vent)
Tape measure
Pliers
Level
Leveling legs (4) for models
with riser
“Y” connector
Short inlet hose
5' (1.52 m) inlet hose
Rubber washer
Leveling legs (4) for models
without riser