Filter
Top Products
5
CYCLE GUIDE — SENSOR DRY CYCLES
Regular
Heavy cottons and denims More Dry Normal
Cottons and linens Normal Normal
Synthetics
White and colorfast permanent press Normal Low
White and colorfast items that require ironing Iron Dry Low
Polyester/acrylic blends, rayon, acetate Damp Dry Low
Washable silk and nylon Damp Dry Low
Items to dry: Cycle:
Temperature
Setting:
Use Sensor Dry Cycles for better fabric care and energy savings
When you are using the GentleBreeze
™
Drying System with IntelliDry
®
Sensor, two metal strips located on the dryer determine the
dryness of the load. When there is moisture left in the clothes, the dryer will continue to run. As clothes begin to dry, the amount of
water left in the clothes decreases, and the timer advances through the remainder of the cycle. When the selected dryness level is
reached, the dryer goes into a cool-down period of up to 15 minutes.
Sensor dry cycles may be used for most loads. Sensor dry cycles give the best drying results in the shortest time. Drying time varies
according to the type of fabric, size of the load, and dryness setting.
After drying a load, check the dryness.
n
If the load is drier than you like, select a setting closer to Iron Dry the next time you dry a similar load.
n
If a load is not as dry as you like, complete drying using a Timed cycle. Select a setting closer to More Dry the next time you dry
a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
Use this cycle to get up to 60 minutes of heated drying time or to complete drying if items are still damp after the automatic cycle.
Timed Dry is also useful for:
n
Heavyweight items and work clothes that require a long drying time.
n
Lightweight items, such as lingerie, blouses, and knits that require a short drying time.
Heavy cottons and denims 60 Normal
Cottons and linens 40 Normal
White and colorfast permanent press 40 Low
White and colorfast items that require ironing 40 Low
Polyester/acrylic blends, rayon, acetate 40 Low
Washable silk and nylon 40 Low
Items to dry: Time
(Minutes):
Temperature
Setting: