Filter
Top Products
13
If you experience
Possible Causes
Solution
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
Not using HE detergent or using too much
HE detergent.
Not using correct cycle for fabric type.
Not using dispensers.
Not washing like colors together.
The suds from regular detergent can keep washer from
operating correctly.
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow manufacturer’s directions based
on load size and soil level.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
Use Whites and Power Wash cycle for tough cleaning.
Use dispensers to avoid chlorine bleach and fabric softener staining.
Load dispensers before starting a cycle.
Avoid overlling.
Do not add products directly to load.
Wash like colors together and remove promptly after the cycle is
complete to avoid dye transfer.
Washer not performing as expected (cont.)
TROUBLESHOOTING
Clogged dispensers or laundry
products dispensing too soon.
Incorrect dispenser
operation
Fabric damage
Sharp items were in pockets during wash
cycle.
Empty pockets, zip zippers, and snap or hook fasteners before washing
to avoid snags and tears.
Strings and straps could have tangled.
Tie all strings and straps before starting wash load.
Items may have been damaged before
washing.
Mend rips and broken threads in seams before washing.
Fabric damage can occur if load is tightly
packed.
Load garments in loose heaps evenly around the basket wall. Load with
dry items only.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer is started.
Monthly maintenance not done as
recommended.
Run the Clean Washer cycle with AFFRESH™ monthly. See “Cleaning
Your Washer” in Washer Maintenance.
Use only HE detergent. Be sure to measure correctly.
Always follow the manufacturer’s directions.
See “Cleaning your Washer” section.
Odors
Liquid chlorine bleach may have been
added incorrectly.
Do not pour liquid chlorine bleach directly onto load. Wipe up bleach
spills.
Undiluted bleach will damage fabrics. Do not use more than
recommended by manufacturer.
Do not place load items on top of bleach dispenser when
loading and unloading washer.
Garment care instructions may not have
been followed.
Always read and follow garment manufacturer’s care label
instructions.
Using wrong or too much detergent.
Not cleaning or
removing stains (cont.)
It is normal for small amounts of water to remain in dispenser.Small amount of water
still in dispenser after
cycle
Normal dispenser operation.
Residual powder in dispenser.
Do not overll dispenser, which causes immediate dispensing.
Always select Fabric Softener option to assure proper dispensing.
Load dispensers before starting a cycle.
Homes with low water pressure may result in residual powder in the
dispenser. To avoid, select a warmer wash temperature if possible,
depending on your load, or use liquid HE detergent.
Use only liquid chlorine bleach in the bleach dispenser.
In wash water temperatures colder than 60° F (15.6° C), some
detergents do not dissolve well. Soils may be difcult to remove.
To avoid, select a warmer wash temperature if possible, depending on
your load, or use liquid HE detergent.