Filter
Top Products
3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
Tools needed for installation
Parts supplied
Parts supplied for PD Models:
Parts supplied for PR Models:
■ Pliers (that open to
1
9
/16" [39.5 mm])
■ Flashlight (optional)
■ Open end wrenches 1/2" and 9/16"
■ Torx
®†
T-20 Security screwdriver
■ 1/4" nut driver
■ Level
■ Wood block
■ Ruler or
measuring tape
A.U-shaped hose form
B.Water inlet hoses (2)
C.Inlet hose washers (4)
D.Transit bolt hole plug (4)
E.Beaded tie strap
†
® TORX is a registered trademark of Acument Intellectual Properties, LLC.
A BC
D
E
Service door lock cam Foam pads
Card reader bezel Card reader wire
harness
Screws (2)