Filter
Top Products
13
3. Loosen the top screw from each of the 2 hinges in Step 2.
A
B
A
B
A.Loosen these screws.
B.Remove these screws.
4. Remove the dryer door and the hinges by lifting upward
on the door. Lay the door on a flat, pr
otected surface,
with the inside of the door fac
ing up. Remove remaining
2 loose screws from dryer front panel.
5. Re
move the 4 plastic plugs located outside the dryer
door opening.
6. Install 4 plastic plugs into screw holes in the dryer left where
the hinges were removed in Step 4.
Reverse the strike
1. Remove the door strike from the dryer door opening.
2. R
emove the cosmetic screw opposite the door strike.
A
B
A.Door strike
B.Cosmetic screw
3. Reinstall the door strike and cosmetic screw on the opposite
side of dryer door opening from where they were removed.
NOTE: Door strike and plugs must be on the same side
of the dryer door opening.
Reinstall the door
1. Remove the 4 screws and 2 hinges from the dryer door.
2. Replace the 4 screws in the same holes.
3. Remove the
4 screws from the opposite side of the door.
4. Install the 2 hinges to the front panel of the dryer using
4 screws. Use the non-slotted side to attach the hinge
to the front panel.
5. Install scr
ews in top hinge holes in the door. Do not tighten
screws. Leave approximately 1/4" (5 mm) of screw exposed.