Filter
Top Products
18
LEVEL DRYER
Level Dryer
42.
Place
level here
Not Level LEVEL Not Level
Check levelness of dryer from side to side. Repeat from
front to back.
NOTE: The dryer must be level for the moisture sensing system
to operate correctly.
Move dryer to nal location
41.
Move dryer to nal location, taking care not to crush or kink
vent.
After dryer is in place, remove corner posts and cardboard
from under dryer.
Turn on cold water faucet
38.
Check that the water faucets are turned on.
Check for leaks
39.
Check for leaks around “Y” connector, faucet, and hoses.
CONNECT VENT
Connect vent to exhaust outlet
40.
Using a 4" (102 mm) clamp, connect vent to exhaust outlet
in dryer. If connecting to existing vent, make sure vent is
clean. Dryer vent must t over dryer exhaust outlet and inside
exhaust hood. Check that vent is secured to exhaust hood
with a 4" (102 mm) clamp.