Filter
Top Products
6
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
SENSOR DRY CYCLE - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Items to dry:
Cycle:
Drying
Temperature:
Dryness
Level:
Default
Time:
Available
Options:
Cycle Details:
Sensor Medium Normal N/A Damp Dry Signal
Temp Level
Wrinkle Prevent
CYCLE GUIDE — SENSOR DRY CYCLES
CYCLE GUIDE — TIMED DRY CYCLES
Items to dry: Cycle:
Drying
Temperature:
Available
Options:
Cycle Details:
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
TIMED DRY - Will run the dryer for the specied time on the control. Depending on model, temperature may be selected on cycle knob
or be a separate control.
Timed Dry Any
Temp Level
Wrinkle Prevent
Time Adjustment
Dries items to a damp level for items that do not
require an entire drying cycle.
Select a drying temperature based on the fabrics in
your load. If you are unsure of the temperature to
select for a load, select the lower setting rather than
the higher setting.
Any load
Rubber, plastic, heat
sensitive fabrics
Timed Dry Air Dry
Temp Level
Wrinkle Prevent
Time Adjustment
Use a no heat (air dry) setting for foam, rubber,
plastic, or heat-sensitive fabrics.
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you like,
select Less Dry next time you dry a similar load.
Work clothes,
medium weight
fabrics, sheets
Jeans, heavy work
clothes, towels
Sensor High Normal N/A Damp Dry Signal
Temp Level
Wrinkle Prevent
Gives the best drying in the shortest time.
Drying time varies based on fabric type,
load size, and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of
the temperature to select for a load, select
the lower setting rather than the higher
setting.
Casual, shirts,
pants, lightweight
items
Sensor Low Normal N/A Damp Dry Signal
Temp Level
Wrinkle Prevent
Any load Wrinkle
Prevent
No heat After a cycle is complete, the load is periodically
tumbled to avoid wrinkles until you are ready to
remove it.
These settings are added at the end of certain cycles to reduce wrinkling.
SPECIAL SETTINGS:
N/A
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying medium-
weight items such as sheets, blouses, dresses, underwear,
permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.