Filter
Top Products
7
Dryer Controls At A Glance
IntelliDry PERM’T PRESS with Press Care
automatically senses the moisture in the
load and shuts off when the selected dryness
level is reached. Permanent Press minimizes
wrinkles of man-made fabrics such as
acrylic, nylon, polyester, or blends with an
extended cool-down by tumbling the load in
unheated air at the end of the cycle. Simply
set the control to the desired dryness level
(more dry – less dry) and press the START
button. The middle ▲ is the initial preferred
setting for the majority of loads.
IntelliDry REGULAR FABRICS automati-
cally senses the moisture in the load and
shuts off when the selected dryness level is
reached. This cycle is designed for loads
such as towels, underwear, t-shirts, jeans,
etc. Set the control to the desired dryness
level (more dry – less dry) and press the
START button. The middle ▲ is the initial
preferred setting for the majority of loads.
AIR FLUFF provides tumbling without heat
for sensitive loads or items needing freshen-
ing. Examples are: certain sweaters, shower
curtains, camping gear, pillows, etc. Set the
control to the desired number of minutes, up
to 20 minutes, and press the START button.
WRINKLE RELEASE will release wrinkles
from items that are clean and dry but slight-
ly wrinkled. This cycle is for clothes from a
crowded closet or suitcase or from sitting in
the dryer too long after the end of the cycle.
It provides 10 minutes of heated tumbling
and 5 minutes of cool-down tumbling with-
out heat. Press the START button for the
cycle to begin.
TIME DRY may be selected for any load if
the IntelliDry sensor system is not desired.
Set the control to the desired number of
minutes and choose the appropriate drying
temperature for the load. Then press the
START button.
DAMP DRY is designed to “partially” dry
items. It provides approximately 20 minutes
of heated tumbling and 5 minutes of cool-
down tumbling without heat. Press the
START button to begin tumbling.
1
Select CycleStep
1