Filter
Top Products
CONTROLS AT A GLANCE
SIGNAL
OFF
LOUD
Step 2 Select ‘signal’
volume
If a volume level is selected, the signal will let
you know when the cycle is done. Signal will
stop when the door is opened, or when the
timer is advanced to an OFF position.
TEMPERATURE
AIR FLUFF
EXTRA LOW
MEDIUM
REGULAR
Step 1 Select
temperature setting
Set TEMPERATURE setting knob to most
appropriate temperature for type of fabric in
load. Follow garment manufacturer’s care
label for recommended temperature settings.
See chart to the right.
LOAD TYPE
REGULAR
(approximately 160° F): Use
for sturdy items like play or work clothes.
MEDIUM (approximately 150° F): Use for
permanent press and synthetic items.
EXTRA LOW (approximately 129° F):
Use for delicate items.
AIR FLUFF (no heat): Use for sensitive
loads or items needing freshening.
Time Dry cycle can be used with all
Temperature settings.
Step 3 Select ‘press care’,
if desired
On Auto Dry only, PRESS CARE helps to
reduce wrinkling after the normal drying cycle.
After COOL DOWN portion of the cycle, it
continues to tumble clothes without heat for
40 minutes, until the dryer door is opened, or
the switch is turned to the OFF position.
PRESS
CARE
ON
OFF
3