Maytag PAVT-5 Washer User Manual


 
6
mp
Cold
C
old
/ 10 Cycles
S
Wash/Spin Speed
Wrinkle Control
G
entle/Fast
Regular
Normal/Fast
Delicate
G
entle/Slow
Pull to Start - Push to Stop
O
ff
R
inse
E
xtra
Rinse
Off
Regular
Extended Spin
Extra
R
inse
S
pin
R
inse
Off
O
ff
1
5
12
8
4
2
6
10
12
Wrinkle Control
Delicates
On
O
ff
E
xtra
Rinse
Select Cycle
To select a cycle, push the control dial in (off position)
and turn it to the right (clockwise) until the pointer is at
the soil level needed for the wash load.
Important: For optimum fabric care, the appropriate
wash and spin speed for the load type must be
selected using the Wash/Spin Speed knob.
Regular
This cycle provides up to 15 minutes of agitation.
Select the Regular W
ash/Spin Speed
setting.
Wrinkle Control
This cycle is designed for most loads. For lightly to
normally soiled garments. Select the
Wrinkle Control
Wash/Spin Speed setting.
Delicates
Delicate is designed for items requiring delicate wash
action. Select the Delicate Wash/Spin Speed setting.
STEP 4
STEP 6
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed
in (off position) when you change the setting.
Note: Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.
STEP 5
Select Options (if desired)
Extra Rinse
When the knob is in the On position, an additional
rinse at the end of the Regular, Wrinkle Control and
Delicate cycles is provided to more completely remove
laundry additives, suds, perfumes, etc.
Control features vary by model.