Filter
Top Products
16
Liquid detergent:
A
Selector in position for liquid detergent
A.Detergent type selector
Powdered detergent:
A
Selector in position for powdered detergent
A.Detergent type selector
Chlorine bleach compartment
(Letter E in Dispenser Illustration)
Add no more than
2
/3 cup (160 mL) liquid chlorine bleach to this compartment. The bleach
will be automatically diluted and dispensed at the best time during the first rinse after the
wash cycle. This compartment cannot dilute powdered bleach.
Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not
guess. Follow the manufacturer’s directions for proper use.
Do not fill beyond the “MAX” level. Overfilling could cause garment damage.
Fabric softener compartment
(Letter F in Dispenser Illustration)
Pour measured liquid fabric softener into the f
abric softener dispenser, if desired.
Do not overfill. The dispenser holds
1
/4 cup (60 mL).
The fabric softener is dispensed in the rinse cycle. If Extra Rinse is selected,
the fabric softener will be dispensed during the Extra Rinse.
Do not use fabric softener dispensing balls in this washer. Dispensing balls will not
operate correctly with this washer.
Do not spill or drip any fabric softener onto the clothes.
At the end of the cycle, a small amount of water may be left in the dispenser.
This is normal.
NOTE: Use only liquid fabric softener in this dispenser.
Pausing or Restarting
1. To pause the washer at any time, select START/PAUSE.
2. T
o continue the cycle, select START/PAUSE (for approximately 1 second).
Changing Cycles, Options, and Modifiers
Not all Options and Modifiers are available with all cycles. Cycles, Options, and Modifiers
can be changed anytime before START/PAUSE is selected.
Options and Modifiers can be changed anytime after START/PAUSE is selected and before the
start of the selected Option or Modifier.
To cancel a cycle and begin a new cycle
1. Select PO
WER/CANCEL twice.
2. Select desired c
ycle.
3. Select
the desired OPTIONS.
4. Select START/PAUSE (for approximately 1 second) to restart the washer at the beginning
of the new cycle.
To cancel a cycle
1. Select PO
WER/CANCEL once.
2. T
he washer powers down, the door unlocks, and clothes can be removed.
NOTE: If the water level or the temperature is too high, the washer will drain automatically
before the door unlocks.
To change Options or Modifiers
after the cycle has started
1. Select START/PAUSE once.
2. Select the desired OPTIONS or MODIFIERS.
3. Select
START/PAUSE (for approximately 1 second) to continue the cycle.
To drain the washer manually
1. Select START/PAUSE once.
2. Select Dr
ain & Spin.
3. Select START/PAUSE (for approximately 1 second) to begin the drain.
4. Wh
en the spin is complete, the door unlocks. Items can be removed from the washer.