Filter
Top Products
1. Open the door and load the drum with
laundry. Ensure that garments do not hinder
closure of the door.
2. Gently close the door pushing it slowly until
you hear the door 'click' shut.
3. Press the On Off button to switch on the
dryer. The indicator will light up and the
START indicator will flash.
4. Turn the Programme Selector dial to select
the required drying program (see
Programme Guide).
5. If drying synthetics, acrylics or delicate items,
press the Acrylics Synthetics button to
reduce the heat level. The light above the
push button will light up when the machine
is in low heat setting. To deselect this status
the machine must be reset.
6. Press the Start Reset button. The dryer will
start automatically and the START indicator
will be continuously lit.
7. The COUNTDOWN display will show the
drying progress in terms of time remaining.
8. If the door is opened during the programme
to check the laundry, it is necessary to press
Start Reset to recommence drying after the
door has been closed.
9. When the 15' indicator is lit the machine
will enter the cool down phase, the clothes
will be tumbled in cool air allowing the load
to cool down.
10. When the programme is complete the END
indicator will light.
16
WARNING!
The drum, door
and load may be
very hot.
Operation
40002643.qxd 03/03/2005 19:42 Page 16