Filter
Top Products
5
CC
ONTROLS ATAGLANCE
Sensor Dry – automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level (very
dry to damp dry) is reached.This cycle is recommended for the
m
ajority of loads including delicates, wrinkle free and
cotton/sturdy items like towels, bedding and jeans.
Time Dry – may be selected for any load if Sensor Dry is not
used. Press the “+” or “–” time pad to select the desired number
of minutes.
Dry Temp – there are four temperature settings. Press the
up “ ” or down “ ” pads to select regular, medium, delicate
or extra low temperatures.
Regular – for sturdy cottons or those labeled “Tumble
Dry.”
Medium – for permanent press, synthetics, lightweight cot-
tons or items labeled “Tumble Dry Medium.”
Delicate – for heat sensitive items labeled “Tumble Dry
Low” or “Tumble Dry Warm.”
Extra Low – provides the lowest heated dry temperature
possible.“Extra Low Temperature” is lower than “Delicate.”
Setting the Signal – the end of cycle signal is adjustable
.
Press the “+” or “–” signal pad to increase or decrease the
v
olume of the signal.
Select Dryness Level – press the “ ” or “ ” arrow pads
to select the desired dryness level.The dryness level can be set
on or between a setting.
Very Dry – used to completely dry sturdy or bulky items
including towels and jeans.
Normal – used for drying the majority of loads.
Damp Dry – designed to partially dry items. Used for items
that lay flat or hang to dry.
Step 1
Or
Step 2
Step 4
Step 3