Filter
Top Products
Operating .....................................................
Clean the Lint Filter...
• after each load.
• to shorten drying time.
• to operate more energy efficiently.
Load the Dryer Properly...
• by placing only one wash load in the dryer at
a time.
• avoid very small loads or mixing heavyweight and
lightweight clothes.
• when only one or two articles need drying, add a
few similar items to improve tumbling and drying
efficiency.
Add A Fabric Softener Sheet...
(If So Desired)
• after loading the dryer.
• to control static cling.
• before the load becomes warm. This helps prevent greasyMooking softener stains.
• and remove any used softener sheets from the dryer to prevent greasy-looking softener stains.
Check the Moisture Monitor...
Indicator lights in the moisture monitor will display NOTE) Ttie:tbpmoni_;:iightmay _othllnk Wheh
when an IntelliDry cycle is in operation. The top light small loads Of'heavy,:bMkyltem_ driedi }uch
will blink on and off. As loads dry, there will be longer : _rge rugs:o_ _eaters'; i ; ; : :
pauses between each blink. No lights will display during
Time Dry.
The bottom light in the monitor will remain on until the
cool down portion of the cycle starts. During cool down
the dryer continues to tumble the load in unheated air to
help minimize wrinkling.