3
Step 5
START WASHER
CONTROLS AT A GLANCE CONT.
HOT/COLD – White and heavily soiled,
color-fast items
WARM/WARM – Delicate or colorfast items
WARM/COLD – Moderately soiled,
colored items; most wrinkle free items
COLD/COLD – Brightly colored, lightly
soiled items; washable woolens
LOAD TYPE
REMEMBER: In wash water temperatures
below 65° F, detergents do not dissolve well
or clean well. Care labels define cold water
as up to 85° F.
If Auto Temperature Control (select
models)
is selected with a warm/warm,
warm/cold, or cold/cold water tempera-
ture setting, the light will illuminate dur-
ing the first fill.
CANCEL – Press this button to cancel and
reset any of the options.
SOAK
ONLY
PRESOAK
MAX
EXTRACT
NORMAL
SPIN
USE
SUPER WASH – Can be used with any
wash cycle to clean very heavily soiled
items. Provides fast agitation and normal
spin throughout all cycles.
EXTRA RINSE – Provides an additional
rinse at the end of the cycle to more com-
pletely remove laundry additives, suds, per-
fume, etc.
AUTO TEMPERATURE CONTROL (select
models)
– assures a cold water wash of
75°F and warm water wash of 95°F. This
option assures detergent will dissolve and
provide optimum cleaning results.
• Add detergent and any additives
• Add load and close lid
• Pull the control dial out to start
Step 3 Select Water
Temperature
Press the appropriate button to select the
wash and rinse temperatures. Follow the
garment care label for best results. Use the
chart at the right as a guide.
Step 4 Select A
Customized Cycle
Press the appropriate button(s) to select
one or more options.
PRESOAK: Provides 12 minutes of agi-
tation and soak before going into the wash
cycle.
SOAK ONLY: Provides three minutes of
agitation and then a soak, then three min-
utes of agitation before an extended soak.
Soak for 30 minutes or less.
MAX EXTRACT: Provides three extra
minutes of spin to remove more moisture
from loads, such as towels. Can only be
used with the WHITES cycle.
NORMAL SPIN: Provides adequate
water removal for most loads.