Filter
Top Products
6
C
ontrol features vary by model.
Select Cycle
To select a cycle, push the control dial in (off position)
and turn it to the right (clockwise) until the pointer is at
the soil level needed for the wash load.
Important: For optimum fabric care, the appropriate
wash and spin speed for the load type must be
selected using the wash/spin speed knob.
Regular Cycle
This cycle provides up to 14 minutes of agitation.
Select the Regular W
ash/Spin Speed
setting.
Wrinkle Control
T
his c
ycle is de
signed for most loads. For lightly to
normally soiled garment
s. Select the
W
rinkle Control
Wash/Spin Speed
setting.
Delicates Cycle
Delicates is designed for items requiring delicate wash
action. Select the
Delicate Wash/Spin Speed setting.
Soak Only (select models)
Provides 4 minutes of agitation, then soak. Avoid
extended soaking – soak for 30 minutes or less.
The control dial must be manually advanced to a spin
setting to spin and drain the water.
STEP 4
STEP 6
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. T
herefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed
in (off position) when you change the setting.
Note: Do not attempt to turn the control dial
counterclockwise. Damage to the timer will re
sult.
STEP 5
Select Options (if desired)
Extra Rinse
When the knob is in the On position, an additional
rinse at the end of the Regular, Wrinkle Control and
Delic
ates cycles is provided to more completely
remove laundry additives, suds, perfumes, etc.
End of Cycle Signal (select models)
The end of cycle signal will sound once the cycle is
completed. T
he end of cycle signal can be canceled by
setting the switch to
Off.