Filter
Top Products
10 16022842 Rev. 0 ©2003 Maytag Appliances Company
General Information
TOOLS FOR SERVICING
The following is a list of tools used to service the
commercial top load washer.
WARNING
!
To avoid risk of electrical shock, personal injury or death from improper servicing, make sure you understand the
proper procedures and usage of tools listed, before attempting any procedures described in the manual. Failure to
understand and comply with safety information may result in severe personal injury or death.
Part Number Description
Test Meters
Appliance Test Meter (AC-DC voltage and Ohmmeter)
Clamp-On Ammeter
038138 Motor Test Cord
20000021 Lip Seal Tool
22038313 Tub Nut spanner Wrench
038315 Brake Package Wrench
038323 Agitator Puller
038327 Motor Pulley Puller
038555 Center Shaft Installation Tool
20001028 T-15 Torx bit
038227 T20H Torx bit
20001052 T25H Torx bit
20001025 #3 Pozi-Drive bit
038184 Water Hardness Test Kit
038195 Rust Test Capsules
056080 Transmission Oil
055978 Rubber Adhesive (yellow)
204999 Silicone Grease
-- RTV Sealant Maytag
-- ¼” nut driver or socket
-- 5/16” nut driver or socket
-- 3/8” nut driver or socket
-- 7/16” socket
-- ½” socket
-- #2 “stubby” Phillips screwdriver
-- #2 Pozi-Drive screwdriver