Filter
Top Products
7
Home Screen – You may
immediately start a cycle using the
default wash settings or choose
“More Programmes” for other
types of programmes. If you wish
to modify the wash cycle, the
following variables can be changed:
If you are satisfied with the selections,
press the
Start/Pause touchpad to begin
the programme.
SETTING A WASH PROGRAMME
If there are no words on the touchscreen, open the door, touch any key (except off), or touch the screen to “wake” the controls.
Step 1
Step 2
fabric
cottons
Press "Start/Pause" or
change your selections below.
wash temp
60° C
more
programmes
options
spin speed
1000 rpm
end chime medium
As you use the touchscreen, if
you feel you are lost, press
Back or Home.
OPERATING INSTRUCTIONS CONT.
Fabrics – Select “Fabric” to
select the appropriate fabric
setting.
Wash Temp – Select
“Wash Temp” to select
the appropriate wash
temperature.
Spin Speed – Select “Spin
Speed” to select the
appropriate spin speed.
Options – This has two screens that has many different options which can
be toggled on and off. To access the additional screen press the arrow key
in the upper right corner of the screen. Press “Continue” to return to
the review screen. Below is a table showing all the options and a brief
description of each one.
fabrics
cottons
Press "Start/Pause" or
change your selections below.
wash temp
60°C
more
programmes
options
spin speed
1000 rpm
program chime med.
Fabric
cottons
delicates/
synthetics
reduced
ironing
woollens
quick wash
fabrics
cottons
Press "Start/Pause" or
change your selections below.
wash temp
60°C
more
programmes
options
spin speed
1000 rpm
program chime med.
Wash Temp.
50 °C
30 °C
60 °C
40 °C
cold
fabrics
cottons
Press "Start/Pause" or
change your selections below.
wash temp
60°C
more
programmes
options
spin speed
1000 rpm
program chime med.
Spin Speed
700 rpm
600 rpm
1000 rpm
900 rpm
500 rpm
800 rpm
Options
continue
extra rinse
on off
pre-soak
on off
1/2 load
on off
pre-wash
on
off
economy
on off
final spin
on off
Options
continue
end chime
medium
remind chime
on off
delay wash
on off
short programme
on off
NOTE: Not all Wash Temps, Spin Speeds,
and options will be available for the various
fabric selections. Some will appear “greyed
out.”
Options Description
Add a Pre-wash Adds a pre-wash. The Pre-wash compartment is flushed during this
step, followed by the main wash compartment during the main wash.
Add a Pre-soak period Adds a standing soaking period of 15 minutes before the main
programme sequence starts.
Add Extra Rinse Adds an extra rinse at the end of the normal programme’s rinse
sequence, and just before the final spin.
No Final Spin Will not advance the programme into a final spin. Clothes load will be
wet at the end of the programme.
Economy Limits all wash fills to "Low" and rinse fills to "Medium" and limits the
wash water temperature to 40C regardless of selection. Cancels Pre-
wash if chosen.
1/2 Load Reduces water levels by one setting from “Medium” to “Low” and/or
from “High” to “Medium”.
Remind Chime Chimes at the end of the programme, every 5 minutes for up to
2 hours.
End Chime Chimes once when wash programme is complete.
Short Programme Shortens programme time.
Delay Wash Sets the machine to start at a predetermined delay time set by the user.
Delay can be set up to 12 hours and 45 minutes,in 15 minute increments.
More Programmes – Select “More Programmes”
to choose between the following four options:
Rinse and Spin (allows up to four rinses)
Spin Only
Automatic Dispenser and Machine Cleaning
Favourites
More Programmes
favourites
rinse & spin
automatic dispenser &
machine cleaning
spin only