EFORE YOU CALL CONT.
Be sure the door is tightly dosed.
Plugcord into a live electrical outlet. (Tub light should illuminate).
Check fuse or reset circuit breaker.
Won't Fill Pressthe start/pause pad.
Turn both faucets on fully.
Straighten inlet hoses.
Disconnect hoses and clean screens. Hose filter screensmay be plugged.
Open and close the door, then push the start/pause pad.
Check fuse or reset circuit breaker.
Won't Tumble Close the door and pressthe start/pause pad. For your safety,the clothes washer will not
tumble or spin unlessthe door is closed.
Door Locked Shut; Press the start/pause pad to stop the machine.
Will Not Open It may take a few moments for the door lock mechanismto disengage.
Open the door and wash the lower portion of the graydoor sealwith a solution of I cup
chlorine bleach to 2 cups water.
Freshening Select the following control panelsetting: Cotton/Sturdy, Hot/Cold, Heavy soil setting.
Your Washer Fill the bleach dispenser cup with liquid chlorine bleach and start the washer.
Pour an additional I/2 cup bleach into the detergent dispenser asthe washer isfilling.
Allow the washer to complete the cycle.
At the end of the cycle,open the door and dry the gray door seal.
• Clothes washer should be leveled properly asoutlined in installation instructions.
• Check the levelingleg lock nuts are tightened.
Is Noisy • Be sure rubber feet are installed on leveling legs.
• Weak floors can causevibration and walking.
• For information on normal operating sounds,see page 12.
For further assistance, call Maytag Customer Service toil-free at 1-888-4-MAYTAG (I-888-462-9824).
U.S. customers usingTTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
II