Maytag MAH4000 Washer User Manual


 
Questions & Answers ........................................
Q. What'sthebestcycleto useif I havestainsonmylaundry?
A. Select the STAIN CYCLE option button and set the control dial on the STAINS setting. Pretreat the stains
with a laundry pre-treat product. Refer to the enclosed Laundering Tips booklet for more information on
treating specific stains.
Q. How largeofa loadcan I washin myMaytagNeptuneTM washer?
A. The tub can be loaded completely full with dry, unfolded clothes. However, do not pack the tub tightly.
If the load is heavily soiled it is very important not to overload the washer.
Q. At the end of the cycle myload comesoutwetter than normal.
A. During tumble and spin the washer may have had difficulty getting to a full spin speed because the load
was not evenly distributed. This can occur with small loads, heavy items or a load in which too much
detergent was used, causing over-sudsing.
Q. Mylaundryitemsseemtobeverywrinkledattheendofthecycle.WhatcanI dotocorrecttheproblem?
A. Wrinkling is caused by the combination of heat and pressure. Be sure wrinkle free or permanent press
fabrics are washed on the COLORS or DELICATES cycle, and a cold rinse is used. (See pg. 3 for
WASH/RINSE Temperature). DO NOT USE MAX-EXTRACT.
Q. My whitesarenotaswhite asI'd like.What canI do?
A. Wash white loads using the WHITES fabric selection. Select the hot wash/cold rinse temperature setting
and put 3/4 cup of chlorine bleach in the bleach dispenser. The bleach will be dispensed in the final min-
utes of the wash providing for optimal whitening. Maytag recommends a hot water wash temperature of
120-140°F (49°- 60° C).
13