Filter
Top Products
12
The washer will not start
• Make sure door is firmly closed.
• Make sure the washer is plugged in.
• Make sure the water source faucet is turned on.
• Make sure to press the
Start/Pause pad.
• Make sure the Child Lock is not activated, see page 6.
• Turn both faucets on fully.
• Make sure the door is tightly closed.
• Make sure the washer is plugged in.
• Check fuse or reset circuit breaker.
• Press the
Start/Pause pad.
• Straighten water inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
• Open and close the door, then press the
Start/Pause pad.
• Make sure the washer is running with sufficient water pressure.
See Installation Instructions.
• Put the detergent in the inner parts of the dispenser
(away from outside edges).
•
Make sure the washer is set on a level sur
face. If the surface is not level,
adjust the washer feet to level the appliance.
See Installation Instructions.
• Make sure that the shipping bolts are removed.
See Installation Instructions.
• Make sure the washer is not touching any other object.
• Make sure the laundry load is balanced.
•
Plug cord into live electrical outlet.
• Check fuse or reset circuit breaker.
• Close door and push the
Start/Pause pad to start the washer.
For your safety, the washer will not tumble or spin unless the door is
closed.
• This may be a pause or soak period in the cycle.
W
ait briefly and it may st
art.
• Check screens on inlet hose
s at the faucet
s for obstructions.
Clean screens periodically.
No water or insufficient
water supply
Detergent r
emains in the
automatic dispenser after the
wash cycle is complete
Stops
Washer vibrates or is too noisy
Troubleshooting
Cycles, options, lights
W
hat can & cannot be
w
ashed
o
perating tips
d
ishwasher use
l
oading
Controls at a glance
Dryer Exhaust tips
S
afety
C
are & Cleaning
S
ervice & Warranty
S
urface Cooking
t
roubleshooting
O
ven Cooking
S
toring the washer
I
nstallation
S
pecial Features
Notes
Continued...