Filter
Top Products
Fabric Softener
Your washer is equipped with an automatic f:abric soft-
ener dispenser. Add the recommended amount of fab-
ric softener to the cup located in the top of the agitator.
The cup may be lifted out for filling. Add warm water to
bring liquid level to the indicated FILL LINE in the
cup. Diluted fabric softener will automaticallybe added
to the rinse. (Always dilute fabric softener with
water.)
Do not interrupt the spin followi;_g the wash cycle
because the softener will go iato the washtub at the
wrong time.
The area in and around the dispenser cup should be
flushed and cleaned with hot water and a soft brush
periodically,
LOADING THE WASHER
For best results, add measured amount of deter-
gent to washtub before adding the sorted clothes
load.
Put d_, unfolded clothes loosely in the tub, up to the
top row of holes for a maximum load. Do not pack or
wrap items around the agitator. See MAYTAG
LAUNDERING GUIDE for suggestions on sorting. Be
sure to empty all pockets, mend any holes or tears and
pretreat stains, spots and heavily soiled areas.
PAGE3