Maytag 40136001 Washer User Manual


 
Installation
Instructions
Top Loading Washer
Keep instructions for future reference.
Be sure manual stays with washer.
1
MOVE WASHER TO
FINAL AREA;
REMOVE SHIPPING
BRACE & PLUG
Protect the floor when moving the
washer. Washer must be within 4' of
desired area before beginning
installation. Open washer lid and
remove installation parts from ship-
ping brace for use.
Reach through foam shipping
brace, grasp bottom of brace,
and pull up to remove.
NOTE: Save shipping plug and
shipping brace; reinstall whenev-
er washer is moved more than 4'.
Do not lift or move washer without
shipping materials in place.
To remove the shipping plug from
the washer, step on the card board
base, tilt the washer back, and slide
out the base.
®
U
Cardboard
base
Shipping
plug
Shipping
brace
Part No. 40136001
Printed in U.S.A. 11/01
You'll Need a Few Things Before You Begin:
Screwdriver
Pliers
Wrench
Level
HOT
COLD
2 water fill
hoses
2 screened
hose filters
2 flat
rubber washers
4 rubber leveling
foot pads
beaded tie-down
strap
Tools Parts Supplied
Instructions dinstallation. . . . . . . . . . . . . . . . . . . . . . . . Page 7
Instructions de Instalación . . . . . . . . . . . . . . . . . . . . . Page 13