Filter
Top Products
Majestic LLC © 01/01/2006
Majestic LLC © 01/01/2006
Page 5
Installing/Removing
Getting things ready to install
your appliance
Unpacking, Inspecting, Electricity, Closets/Alcoves,
Plumbing, Venting
Unpacking
•Check the packing box for external damage. It is your responsibility to
register any damage with the freight company delivering the product.
•Remove the strapping, then slide the cardboard surround off the
machine. Re≠move the foam protecting material and the plastic bag.
•Write down the serial number from the box or the back of the machine.
•Destroy the carton, plastic bags and foam parts after appliance has
been unpacked.
•Children should never be left alone or unattended in the area where
appliances being unpacked.
• If you have any doubts, do not use the appliance and call on a qualied
technician.
OWNER RESPONSIBLE
FOR DAMAGE RESULTING
FROM TIPPING MACHINE
AFTER REMOVING
SHIPPING BOLTS. AVOID
TIPPING MACHINE
FORWARD AFTER
SHIPPING BOLTS ARE
REMOVED
REMOVING THE FOAM DRUM SUPPORT
REPLACING THE METAL BOTTOM PAN.
EXTRA CARE HAS BEEN TAKEN TO PREVENT SHIPPING
DAMAGE. MAJESTIC IS THE ONLY COMPANY WHO SHIPS THIER
APPLIANCES WITH A DRUM SUPPORT TO REDUCE TRANSIT
DAMAGE. THE FOAM DRUM SUPPORT MUST BE REMOVED. HERE
WE DEMONSTRATE HOW TO ACCOMPLISH THIS.
Carefully tip the unit
from front to back mak-
ing sure it can’t tip all the
way over.
Remove the foam drum
support.
With the unit tipped
back, loosen the leveling
legs a few turns.
Tip the unit the other
direction from the back
and remove the leveling
legs totally
Slide the bottom pan so
that the front slots in the
pan t over the feet of
the leveling legs.
Replace the rear leveling
legs and tighten them
down securely.
Go to the front of the
machine and retighten
the leveling legs and you
are done.
SHIPPING
BOLTS MUST
REMAIN IN
MACHINE
DURING THIS
PROCESS!