LG Electronics WM2487H*M Washer User Manual


 
HOW TO USE THE WASHER
14
• Rotate the Cycle selector knob to select cycle
designed for different types of fabric and soil
levels.
• Each cycle has a preset Water Temperature, Spin
Speed, Soil Level, and Option (See page 13).
• The preset settings can be changed anytime
before Start.
NOTE: This front load washer requires longer cycle time
and gets clothes much cleaner, yet is more gentle
on the fabrics, than top load washers. Washing
time can be reduced significantly for small loads
or lightly soiled loads by selecting Speed Wash
cycle and setting the Soil Level button at Light.
NOTE:
- If you do not press the Start/Pause button within 4
minutes of selecting a cycle, the washer automatically
turns off.
2. Cycles
• Use this button to turn the Power On/Off.
1. Power
• Use this button to start/stop the washer.
3. Start/Pause
Steam Wash
• For tough stained clothes, underwear, or baby clothes.
• Steam Wash is available with Sanitary,
Bulky/Large, Perm. Press, Cotton/Normal, and
Baby Wear cycles.
• This option features upgraded washing
performance with low energy and water
consumption.
• Do not load delicates such as wool, silk, and
easily discolored clothes.
NOTE:
- Steam wash is a highly concentrated and efficient.
It may seem there is no water inside the drum, but this
is normal.
- Steam spray may not be seen clearly through the door;
however, the washer is spraying steam strongly inside.
- During the steam operation, a spraying sound will be
heard. This is not a malfunction.
CAUTION:
Do not reach into the washer while operating. Steam
can cause severe burns.
5. Steam
• Allows the start of any cycle to be delayed for
1~19 hours.
• Choose the wash cycle for your load, and then
press the Delay button once for one hour or press
the button again to increase the delay wash time
up to 19 hours in one hour increments, and then
press the Start/Pause button.
4. Delay
!