LG Electronics WD(M)-16100FD Washer/Dryer User Manual


 
48
ow to use washer
H
Time Delay
1. Time Delay
Preparing washing before starting “Time Delay.”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in the
drawer.
• How to set Time Delay
1. Press Power( ) button.
2. Rotate the Program Dial button to select
the program or course (option) you require.
3. Press the Time Delay button.
4. Press the Time Delay button or rotate the
Program Dial button to set the desired
time.
5. Press the Start/Pause( ) button.
(“ ” blinks.)
• If Time Delay button is pressed, “3:00” is
displayed. The maximum delayed time is
24:00 hours and the minimum time is 3:00
hours.
• Each pressing of the Time Delay button
advances time on delay by one hour.
• To cancel the time delay, press the
Power( ) or Reset button.
• Time delay is ‘expected time’ from the present
to the completion of washing cycle or selected
process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
Coloureds Time left 16hrs
Wash
Option
Temp
Rinse
Spin
16
Finish after
hours
Option Time Delay Reset Help
• If the washer encounters a fault during
operation, the associated fault will be
displayed.
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Door is not closed
“ ” : Water temperature trouble
“ ” : Problem of overfilling water
“ ” : Water pressure sencing error
“ ” : Over load in motor
“ ” : Over load in motor
If these error letters are displayed, please
refer to the troubleshooting page53 and
follow the guide.
Display
• When Child lock is selected, the
“ ” is displayed.
• When time delay is selected, it shows
the remaining times to finish the selected
program.
2. Special function display
• Displayed washer process with words
and animations.
• Each course, word background gets
darker and current process animation
gets lighter.
• When touching the button, screen gets
lighter and darker in about 3 minutes.
1. Washer process display
3. Self diagnose display