Filter
Top Products
ERROR SYMPTOM
1 WATER INLET Water has not reached to the pre-set level within 4 min. since
ERROR inlet valve operated, or water has not reached to the normal
level within 25 min.
2 IMBALANCE
The appliance is tilted.
ERROR
Laundry is gathered to one side.
Non distributable things are put into the drum.
3 DRAIN ERROR
Water has not drained enough within 5 min.
4 OVERFLOW
Water is automatically being pumped out because too much
ERROR water is in the tub.
5
SENSOR PRESSURE
The sensor pressure switch is out of order.
S/W ERROR
6 DOOR OPEN
The
Start/Pause
button is pressed with the door open.
ERROR
The door switch is out of order.
7 HEATING
ERROR
The thermistor is out of order.
7-3.ERROR DISPLAY.
If you press the Start/Pause button when an error in displayed, any error except S/W ERROR will disappear
and the machine will change into pause status.
In case of SENSOR PRESSURE S/W ERROR HEATING ERROR DOOR OPEN ERROR if the
error is not resolved within 20 sec. In the case of other errors, if the error is not resolved within 4 min. power
will be turned off automatically and the error code will be blinked. But in case of OVER FLOW ERROR ,
power will not be turned off.
16
Crease Care
Rinse+
Rinse Hold
No Spin
400
800
1000
Time Save
Pre Wash
Time Save
Pre Wash
Crease Care
Rinse+
Cold
30
40
60
95˚C
Time Save
Pre Wash
Cold
30
40
60
95˚C
Time Save
Pre Wash
Crease Care
Rinse+
Cold
30
40
60
95˚C