Filter
Top Products
14
ERROR SYMPTOM CAUSE
1 WATER INLET Water has not reached to the pre-set level within 8 min. since
ERROR inlet valve operated, or water has not reached to the normal
level within 25 min.
Load is too small.
2 IMBALANCE
The appliance is tilted.
ERROR
Laundry is gathered to one side.
Non-distributable things are put into the drum.
3 DRAIN ERROR
Water has not drained enough within 10 min.
4 OVERFLOW
Water is automatically being pumped out because too much
ERROR water is in the tub.
5 SENSOR
PRESSURE
The sensor pressure switch is out of order.
S/W ERROR
6 DOOR OPEN
The
Start/Pause
button is pressed with the door open.
ERROR
The door switch is out of order.
7 HEATING
ERROR
The THERMISTOR is out of order.
7-4.ERROR DISPLAY.
If you press the Start/Pause button when an error in displayed, any error except will disappear and
the machine will change into pause status.
In case of if the error is not resolved within 20 sec. In the case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in the case of , power will not be turned off.