LG Electronics WD-3274RHD Washer/Dryer User Manual


 
nstallation
I
5
cap
1. To prevent internal damage during
transport, the special 3 bolts are locked.
Before operating the washer, remove
the bolts along with the rubber bungs.
If they are not removed, it may cause heavy
vibration, noise and malfunction.
3. Take out the 3 bolts along with the rubber
bungs by slightly twisting the bung. Keep
the 3 bolts and the spanner for future use.
Whenever the appliance is transported, the
transit bolts must be refitted.
The appliance is fitted with shipping bolts to prevent internal damage during transport.
2. Unscrew the 3 bolts with
the spanner supplied.
4. Close the holes with the caps supplied.
Shipping
Install or store where it will not be exposed to temperatures below freezing or exposed to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other
vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at
all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the
appliance guarantee.
Removing shipping bolts