LG Electronics TD-V14247E Clothes Dryer User Manual


 
Part 4 ACCESSORIES INSTALLATION
16
To ensure safe and secure installation, please
observe the instructions below.
Place washer firmly on a stable, even and
solid floor.
Peel protective paper off the tape from the
stacking kit side bracket.
Fit the stacking kit side bracket firmly to the
side of top plate by attaching the double-
sided tape to top plate as picture shows.
Secure stacking kit side bracket to the
washer with a screw on the back of bracket.
Repeat Steps 2, 3, 4 for the other side.
Place the dryer on top of the washer by fitting
legs as shown in the picture. Avoid finger
injuries - be careful not to pinch fingers
between the washer and dryer. Slide dryer
slowly backwards to the stopper of kit.
Insert the front rail. Push the front rail back
to the stoppers of side stacking kit.
Attach both sides of the front kit with screws.
• Do not use stacking kit with a gas dryer in potentially
unstable conditions like a mobile home.
Stacking kit
1
2
3
4
5
6
7
Stacking Kit Installation Instructions
Clean the surface before attaching the brackets
and double-sided tape.
WARNING!
Note
• The weight of the dryer and the height of
installation makes the stacking procedure
too risky for one person. This procedure
should be performed by 2 or more
experienced service personnel.
• Incorrect installation can cause serious
accidents.
WARNING!
• Do not stack a washer on the top of the dryer.
• Incorrect installation can cause serious
accidents.
Dryer
Washer