Filter
Top Products
11. Custom Programming
Set up your favorite combination ]
l( }
of settings and save them here
for one-touch recall.
To store a CUSTOM
PROGRAM.
l. Select a cycle
2. Change DRY LEVEL and TEMP. CONTROL.
3. Select OPTIONS you want.
4. Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM button, then press
START/PAUSE.
12. Beeper
The BEEPER controls the
volume of the beep that is made
when you press any of the
buttons on the control panel and
the termination of any cycle is
indicated.
Press BEEPER to adjust the
sound level or turn off the signal.
0 HIGH
OLOW
BEEPER
Clean lint filter
Clean dm lint filter after each use and check it
before use. Not cleaning or emptying the filter
will increase drying time and energy
consumption, therefore dryer life expectancy
could be shortened after all.
-II Clean the door and its opening
1. Wipe out the
door opening.
Otherwises,
build-ups of dirts
and foreign
objects will
damage sealing
of door.
2. Clean the
transparent glass
door to keep
inside view clear
througth the
glass.
1.Open the door
and pull the filter
straight up
2.Clean the filter using one of following ways in cases.
_) Run the fingers
across the filter
(_ Vaccum the lint
filter
(_ Wash the lint
screen in
warm,soapy
water.
Dry thoroughly
and replace.
28