Filter
Top Products
26
Part 8 OPERATING YOUR DRYER
• Time Dry
Use this cycle to complete drying if items are still
damp after an Sensor Dry Cycle. Time dry is also
useful for drying heavyweight and bulky items,
such as bedspreads and work clothes.
Select DAMP DRY BEEP
to alert you that your clothes
are approximately 80% dry.
This is useful when you want
to remove lightweight items
in a mixed load to prevent overdrying or remove
partially dry items that may need ironing.
NOTE: The Damp Dry Beep is only available with
the Sensor Dry Cycles.
Damp Dry Beep
WRINKLE CARE prevents
wrinkles that form when you
cannot unload the dryer promptly
at the end of a cycle. During this
option, the dryer will periodically
tumble.
• Press WRINKLE CARE to get up to 3 hours of
heat-free, periodic tumbling at the end of a cycle.
• Stop WRINKLE CARE at any time by pressing
WRINKLE CARE or opening the dryer door.
NOTE: If you do not select WRINKLE CARE, the
dryer stops after cool down.
WRINKLE CARE
This chart shows examples of items that can be
dried using AIR DRY.
Reset cycle to complete drying, if needed.
• Check to see that coverings are securely stitched.
• Shake and fluff pillows by hand periodically
during the cycle.
• Dry item completely. Foam rubber pillows are
slow to dry.
NOTE: Air Dry is not available with Sensor Dry
Cycles.
When using Air Dry
Manual Dry
Cycles Load Type
Temp.
High
Medium
High
Air Dry
Default Time*
(Minutes)
25
20
30
SPEED DRY
SMALL LOADS
FRESHEN UP
Remove Wrinkles
AIR DRY
Manual Preset Cycle Settings
Type of Load Default Time*
(Minutes)
Foam rubber-pillows,
padded bras, stuffed toys
20 - 30
20 - 30
40 - 50
10 - 20
Plastic-Shower curtains,
tableclothes
Rubber-backed rugs
Olefin, polypropylene,
sheer nylon
You can customize your cycles by selecting options.
7. Options
Use Modifiers to select temperatures for the Manual
Cycles. Press TEMP. CONTROL until the desired
temperature setting glows. Temperature modifiers
cannot be used with the Sensor Dry Cycles.
8. Modifiers