Filter
Top Products
10
Control Panel Features
Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for
more detailed information.
W
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety
Instructions, before operating this dryer.
INTRODUCING YOUR DRYER
C
F
G
DE
A
B
NOTE
Pressing the ON/OFF button during a cycle will
cancel that cycle and any load settings will be lost.
A
108&30/0''#6550/
Press to turn the dryer ON. Press again to turn the
dryer OFF.
D
.03&5*.&-&445*.ᦖ/4
To adjust the drying time, use these buttons with
MANUAL DRY, TIME DRY, and STEAM FRESH™ cycles,
as well as the REDUCE STATIC and EASY IRON
options. Press the MORE TIME button to increase the
selected manual cycle time by a minute; press LESS
TIME to decrease the cycle time by a minute.
E
$:$-&4&55*/(#6550/4
Use these buttons to select the desired cycle
settings for the selected cycle. The current settings
are shown in the display. Press the button for that
option to view and select other settings.
F
5*.&"/%45"564%*41-":
The display shows the settings, estimated time
remaining, options, and status messages for your
dryer.
G
015*0/#6550/4
The OPTION buttons allow you to select additional
cycle options. Certain buttons also allow you to
activate special functions by pressing and holding
UIFCVUUPOGPSTFDPOET
B
$:$-&4&-&$503,/0#
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. On MANUAL
DRY cycles, these settings can be adjusted using
the cycle setting buttons anytime before starting
the cycle.
NOTE
If you do not press the START/PAUSE button to
SFTVNFBDZDMFXJUIJONJOVUFTUIFESZFSUVSOT
off automatically.
C
45"351"64ᦖ/
Press this button to START the selected cycle. If the
dryer is running, use this button to PAUSE the cycle
without losing the current settings.